InnoTech Instrumentation Co., Ltd. 創新科儀有限公司

The MicroBio MB1 bioaerosol sampler is the simplest to use and most economical microbial air sampler of its kind. It has been fully validated and thousands of units have sold worldwide.
The Affordable Microbial Air Sampler
The MicroBio MB1 bioaerosol sampler is capable of using both a 90 mm Petri Dish or 55 mm contact plates with 220 and 400 hole sampling head option. Using standard readily available consumables at low cost with a variety of media makes the MicroBio MB1 an economical instrument to use. The MicroBio MB1 bioaerosol sampler is an invaluable device for use in food and packaging quality assurance, indoor air quality and education.
Specification

	MB1 - 220 Hole	MB1 - 400 Hole
Sample head	220 holes x 1mm Stainless steel	400 holes x 0.7mm Anodised Aluminium
Autoclavable	✓	✓
Flow (L/min)	100	100
Sampling Volume per Sample (litres)	10 - 2,000	10 - 2,000
Autonomy (litres)	> 60,000	> 60,000
User defined volumes	×	×
d50 (um)	1.7	1.35
Particle velocity (m/s)	9.65	10.83
LCD display	×	×
Microprocessor Control	✓	✓
Start delay	1 to 60 minutes	1 to 60 minutes
90mm Petri	✓	✓
55 mm contact	✓	×
Weight (kg)	0.75	0.72
Tripod mount	×	×
Dimensions	196 x 100 x 108 mm with attached sampling head
Battery	4 x AA NiMH cells, 6V
Battery replacement	User replaceable for under £15
Fast charger (minutes)	100
Charger	UK, Euro, USA, Australia and 12V in-car
Carry Case/Bag	✓
DTI VAM Validated	✓
Warranty	2 years

Supplied with the MB1 Bioaerosol Sampler

Petri dish and contact plate spring sets
Stainless Steel Sampling head
Printed operating manual
Padded carry bag
Multi-voltage world-wide charger with international plugs and 12V in-car plug
Ansmann maxE NiMH cells – pre-charged so the MB1 is ready to use out of the box
Certificate of Calibration

Sampling Head Option
The MicroBio MB1 can be purchased with the option of one of two types of sampling heads. The MicroBio MB1 will be calibrated for use with the selected head. If swapping to another head type, the MicroBio MB1 must be re-calibrated.
220 x 1 mm hole stainless steel head
This is the standard head sold with the MicroBio MB2 and MB1 air samplers. It is designed as a dual purpose head for both 55/60mm contact plates or up to 90mm Petri dishes. The d50 cut-off point of 1.7 um and has a jet velocity of 9.63 m/s. It is the ideal head for general purpose sampling in air quality and food production.

MicroBio 220 Hole Sampling Head

400 x 0.7 mm hole anodised aluminium head

Available as a no-cost option, this head provides full coverage of 90mm Petri dishes with a d50 point of 1.35 um and air jet velocity of 10.7 m/s. These heads are ideal for use in areas needed higher sensitivity of collection.